If equipped with fog lamps, they are controlled by the
band on the middle of the turn signal
To use the fog lamps, the ignition must be turned on and the low-beam headlamps or parking lamps must be on.
Turn the band to to turn the fog
lamps on. The band automatically returns to its starting position when released. The fog lamp indicator light comes on in the display on top of the center stack. See Front Fog Lamp Light on page 5-21.
To turn the fog lamps off, turn the band to
again. The fog lamp indicator light
will go off.
The fog lamps will also turn off when the high-beam headlamps are turned on. When the high-beam headlamps are turned off, the fog lamps will turn on again.
Some localities have laws that require the headlamps to be on along with the fog lamps.
If No Steam Is Coming from the Engine Compartment
If an engine overheat warning is displayed but no steam can be seen or heard, the problem may not be too serious. Sometimes the engine can get a little too hot when the vehicle: Climbs a long hill on a hot day. Stops after high-speed driving. Idles for long periods in traffic. If the ...
Replacing Airbag System Parts after a Crash
Warning A crash can damage the airbag systems in the vehicle. A damaged airbag system may not work properly and may not protect you and your passenger(s) in a crash, resulting in serious injury or even death. To help make sure the airbag systems are working properly after a crash, have them in ...
Vehicle Data Recording and Privacy
The vehicle has a number of computers that record information about the vehicle’s performance and how it is driven. For example, the vehicle uses computer modules to monitor and control engine and transmission performance, to monitor the conditions for airbag deployment and deploy them in a cr ...